Features – Plixir Power

Noratel Transformer

BAC

We only use custom-wound balanced transformers with Noratel XQ eXtra Quiet noise attenuation technology. The transformer has dedicated models for 120 Vac input and 230 Vac output, and each transformer only has a single winding for their intended application for the best performance possible.

Easy attenuation of high-frequency noise

Lower output impedence vs. the wall-socket mains Your equipment can draw power effortlessly.

Balanced circuit of the transformer improves common-mode noise rejection.

Ground-referenced AC power supply to your equipment lowers noise floor and reduces common hum and hiss noise issues.

All the benefits are achieved in a natural way: the epitome of good engineering precisely built in accordance to our concept of PureTone.

Two-stage Voltage Regulation

BAC

Consisting of an open-loop first-stage pre-regulator and a close-loop feedback second stage, the former filters the bulk of the noise, specifically the high-frequency noise, and the heat from the latter's voltage regulator. It also acts as a “gate” to prevent the downstream noise from traversing back to the AC power mains.

For Elite BAC 150/400 and BDC

Bespoke Aluminium Case

We use a special 1 piece extruded, 5mm-thick aluminium casing body. Coupled with thick metal top and bottom plates, it provides an ultra-rigid casing that guards against the sound-degrading effects of mechanical vibrations and protection from external damage.

For Elite BAC 1500 and 3000

Custom Made Footers

Besides boasting thick aluminum casing, we also use a custom made Bfly Audio's Master Pro-Feet Series isolation footers from Germany. They further improve the performance of the Elite BAC by isolating the heavy Elite BAC from the ill effects of self and environmental vibration and contribute to the natural sound of the Elite BAC.

Only for Elite BDC and BAC 150/400

Stackable Design

We learnt from years of building power conditioners and supplies that customers’ hate running out of space for their systems. And experienced audiophiles know that a neat setup with minimal cabling contributes to a cleaner and better sound. Our new Elite range of AC and DC power products are stackable to minimise their footprint and your cabling needs, while providing high-end power-conditioning performance for your system.

Front

Back

Customise to fit your exact power requirements

Choose from a set of different voltage and current-rating AC and DC power products, up to a stack of three. The ability to design your own stack of power products helps you optimise your system for better audio reproduction compared to singular products. And our balanced power transformers that reduce ground loop current and noise issues mean unparallelled performance.

Neater setup and simpler cable routing Stackable AC power conditioner and DC power supply save space for equipment and cabling. Only one AC power cord is required to power the whole stack. This results in better sound due to neater setup and simpler cable routing.

Optimised System Grounding Optimised system grounding with balanced AC power transformers. Eliminate ground loop currents, loop area and noise from the power supply. Reduces hum and hiss issues from the system. Increases system resolution naturally.